Mémoires flash industrielles

eMMC 5.1 20Go pSLC -40/85°C

Ref.Mozaïk Storage : PMS-6266

eMMC 5.1 20Go pSLC -40/85°C, gamme EM-36 de Swissbit. Interface eMMC 5.1. Lecture 320 Mo/s, écriture 230 Mo/s, 666 TBW. Rétention des données 10 ans. Devis sur demande.

DEMANDE DE DEVIS

PRENDRE RDV TEL.

Description

Ref.Fabricant : SFEM020GB1ED1TO-I-6F-31P-STD
Gamme : EM-36 Series
Fabricant : Swissbit AG
Temp.Fonct : -40°C ~ +85°C
Fact.Forme : FBGA 100

Informations

Fabricant Swissbit AG
Numéro d'article fabricant SFEM020GB1ED1TO-I-6F-31P-STD
Sous-catégorie eMMC
Interface eMMC 5.1
Type de Flash pSLC
Facteur de forme FBGA 100
Capacité 20 Go
Vitesse de lecture (max.) 320 Mo/s
Vitesse d’écriture (max.) 230 Mo/s
Téraoctets écrits (TBW) (max.) 666 To
Température de fonctionnement -40°C ~ +85°C
Température de stockage -40°C ~ +85°C
Chipset Industrial Grade
Alimentation de fonctionnement 1.8V/3.3V
Informations supplémentaires Industrial / Automotive embedded MMC 5.1 with Kioxia pSLC NAND flash
Typical applications: POS/POI / PLC / IoT / gaming / medical and use as general boot medium for embedded applications
Compatibility: Fully compliant with JEDEC e.MMC 5.1 Standard (JESD84-B51)2
Data retention: 10 years at life begin / 1 year at life end (at 40°C)
100-ball BGA / 1.0mm pitch / 14 x 18mm
3D TLC NAND base technology in Enhanced Mode (pSLC)
Single enhanced mode partition
Eleven-wire bus (clock / Data Strobe / 1 bit command / 8 bit data bus) and a hardware reset
Three different data bus width modes: 1-bit (default) / 4-bit and 8-bit
Clock frequencies 0-200MHz / High Speed Mode HS400
Command Queue Feature according to e.MMC Spec 5.1
Power Supply: (Low-power CMOS technology): VCCQ 1.7V1.95V or 2.7V3.6V e.MMC supply / VCC 2.7V3.6V NAND Flash supply
Power-fail data loss protection
Wear Leveling technology
Read Disturb Management
Auto Read Refresh
Diagnostic features with Device Health Report according to e.MMC Spec 5.1 and detailed