Mémoires flash industrielles

SSD 2.5" SATA 256Go SLC PLP -40/85°C

Ref.Mozaïk Storage : PMS-0689

SSD 2.5" SATA 256Go SLC PLP -40/85°C, gamme BON-III de APRO. Interface SATA III. Lecture 173 Mo/s, écriture 166 Mo/s, 1807 TBW, 60 000 cycles P/E. MTBF > 3 000 000 heures. Devis sur demande.

DEMANDE DE DEVIS

PRENDRE RDV TEL.

Description

Ref.Fabricant : WR2SR256G-MSITI-UFE(USE)P
Gamme : BON-III Series
Fabricant : APRO Co. Ltd.
Temp.Fonct : -40°C ~ +85°C
Fact.Forme : Métallique

Informations

Fabricant APRO Co. Ltd.
Numéro d'article fabricant WR2SR256G-MSITI-UFE(USE)P
Sous-catégorie 2.5'' SSD
Interface SATA III
Type de Flash SLC
Facteur de forme Métallique
Capacité 256 Go
Endurance en nombre de cycles P/E (max.) 60 000 cycles P/E
Vitesse de lecture (max.) 173.4 Mo/s
Vitesse d’écriture (max.) 165.8 Mo/s
Téraoctets écrits (TBW) (max.) 1807.4 To
MTBF 3 000 000 heures
Fonctionnalité S.M.A.R.T. Oui
PowerLossProtector Oui
Température de fonctionnement -40°C ~ +85°C
Température de stockage -50ºC ~ +95ºC
Alimentation de fonctionnement 5V +-5%
Vibrations 70 Hz ~ 2000 Hz - 15G - 3 axes
Chocs 1500 G - 0.5ms - 3 axis
Informations supplémentaires Industrial 2.5" rugged metal SATA III SSD with Toshiba SLC NAND flash
Compatibility: Compliant with SATA Revision 3.1; Compliance with Existing Sanitize (Purge) Standards by software vendor commands; SATA 1.5Gb/s; SATA 3Gb/s & SATA 6Gb/s Interface compatible; ATA-8 ACS2 command set; Compliance with Existing Sanitize (Purge) Standards by software vendor commands
ECC: Hardware BCH ECC capable of correcting errors up to 66-bit/1KB
MTBF: > 3 000 000 hours
Standard 2.5" SATA Flash Disk form-factor (7mm)
SATA 7-pin (data) + 15-pin (power connector) SATA Interface
Support Software command set for FE/SE function
Supports Hardware Trigger for FE/SE function
Supports Hardware jumper setting for Write Protect function
Support Full-Drive Encryption
S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) feature set support
Native Command Queuing (NCQ) support
TRIM maintenance command support
Support Global wear-leveling algorithm
Designed with a DRAM buffer which is support high transfer rate
CE & FCC certified / RoHS & REACH compliant
Certificats CE / FCC
Poids 100 g
Dimensions 100mm x 70mm x 9.2mm
Garantie 5 ans